GENERAL X-RAY TUBES
DU2550-E
MAXIMUM THROUGHPUT WITH EXCELLENT RELIABILITY
The DU2550-E is a high-speed X-ray tube assembly, designed to improve workflow and accelerate image acquisition in heavily used nearby fluoroscopy and radiography systems. Its unique thermal management concept enables extraordinary patient throughput rates in combination with excellent reliability.
Improved workflow Convective air cooling
needed
The DU2550-E is part of the DU-E tube family, and has been specifically developed to serve nearby fluoroscopy and radiography needs. The DU-E X-ray tubes are designed to support workflows of 120 exposures per hour, for all kinds of radiographic applications. Even after eight hours of continual, consecutive examinations, fulfilling two exposures per minute, this tube assembly still reaches less than 90% of its heat storage capacity. This applies for radiographic chest examinations as well as for more demanding examination combinations which require more power, such as the pelvis or stitching images of the spine.
Specifications DU2550-E
| Maximum Tube Voltage [kV] | | 150 |
| Focal Spots | Small Focus | 0.6 |
| Focal Spots | Large Focus | 1.0 |
| Nominal Anode Input Power [kW] | Small Focus (equivalent anode input power) | 250 W: 25 20 W: 30 |
| Nominal Anode Input Power [kW] | Large Focus (equivalent anode input power) | 250 W: 50 20 W: 60 |
| Nominal Continuous Input Power for Assembly [W] | | 200 |
| Maximum Heat Content of Assembly [kHU] | | 2,046 |
| Maximum Permissible Rate of Start-Stop Cycles per Minute (Please note: this rate cannot be applied continuously without reaching | | 4 |
| Nominal Anode Rotational Speed [rpm] | | 9,000 |
| Anode Angle | | 15° |
| HV Cable Connection | | O3 |
About Dunlee
