GENERAL X-RAY TUBES

DU33100-E

MAXIMUM THROUGHPUT WITH EXCELLENT RELIABILITY

The DU33100-E is a high-speed X-ray tube assembly, designed to improve workflow and accelerate image acquisition in heavily used radiography and fluoroscopy rooms with high peak power requirements. Its unique thermal management concept enables extraordinary patient throughput rates in combination with excellent reliability.

KEY BENEFITS

Improved workflow

Up to 120 exposures per hour without overheating
Enables 4 accelerations per minute

Convective air cooling

No additional cooling devices (e.g. fans/chillers)
needed

259.0 KB

The DU33100-E is the most powerful unit in the Dunlee DU-E tube family.

DU-E X-ray tubes are designed to support workflows of 120 exposures per hour, for all kinds of radiographic applications. Even after eight hours of continual, consecutive examinations, fulfilling two exposures per minute, this tube assembly still reaches less than 90% of its heat storage capacity. This applies for radiographic chest examinations as well as for more demanding examination combinations which require more power, such as the pelvis or stitching images of the spine.

Specifications DU33100-E

Maximum Tube Voltage [kV]		150
Focal Spots	Small Focus	0.6
Focal Spots	Large Focus	1.2
Nominal Anode Input Power [kW] (High Speed 150Hz)	Small Focus (equivalent anode input power)	250 W: 30 20 W: 33
Nominal Anode Input Power [kW] (High Speed 150Hz)	Large Focus (equivalent anode input power)	250 W: 85 20 W: 100
Nominal Continuous Input Power for Assembly [W]		200
Maximum Heat Content of Assembly [kHU]		2,046
Maximum Permissible Rate of Start-Stop Cycles per Minute (Please note: this rate cannot be applied continuously without reaching critical housing temperature)		4
Nominal Anode Rotational Speed [rpm]		9,000
Anode Angle		13°
HV Cable Connection		O3

Download leaflet

About Dunlee

Dunlee is a brand of the Philips Company Group and distributes all products, solutions and services for the third-party imaging business. The product portfolio includes CT, MR and X-ray solutions for OEMs, CT replacement tubes and 3D printed tungsten products.